OOOhhhh Yesss!!

Annddddd....

As you feel you're done with every work and its time to party the very next moment something stops you from having fun!

Finally i was done with my Module 4 Work and to my utter surprise i was given some more to do!

Do you know why?

I guess because i complete my work on time or sometimes before time with proper understanding!!

But ppl believe that is not the case and then I have gotto prove myself once again!

BUT 

My mom does says that ppl expect some more only from those, from whom they believe they can get the result....

 (That's quite an indirect compliment then!... Thanks to my faculties and my MOM as well.. 😊😄) 

So Hi Guys! I am back and now moving forward i would like you all to have a look on my 

"Attempt of another Prototype" 

Here you go... 

Does it give the feel of Dyer's stall?

The base shows a structure of a
COLOR PALETTE 

Let me know if you like that and would like to know more about it.

That's all guys!

Wish me luck guys as i have my Last Jury for Foundation Course

TOMORROW!

Nervous? A bit! 😂

That's all guys!

Catch you soon.....

Toodles! 🙋

Hey there all you fellas! 😊

So as i did mentioned in my last post that i ll soon be uploading the pic of my 3D PROTOTYPE !

So the time has finally come!

So,  as my understanding i would first like to tell you the major difference between a model and a prototype.... which i figured out just a few days back! Well Thanks to my Visual Skills Faculty!

As you see the Prototype is a miniature 3D form of what we are expecting exactly same as a 3D Model but the only difference is that the Model does not work i.e does not show any utility rather the Prototype does everything that the actual 3D structure will be . Basically it shows it use unlike the model which shows just the structure.

That is all now do have a look on my protoype :)

Here we go!

The basic structure 

When in use  (side view)

Every need of the Dyer is satisfied

Yessssss.........!!

Finally over!!

This calls for a BIG PARTY NIGHT !!

Catch you soon Guys!

Toodles! 🙋

Hey Guys!

So before directly jumping onto the 3D Prototype i first thought of working on a software by the name of Google Sketch up (which is a very basic software for 3D modelling). 

You can easily find it on stores or even online free Trial versions are also available (Do not disclose but i am too working on the trial version right now). 

Anyways! 

Well its really easy to use and there are even several videos on Youtube to learn Google Sketch up. I can even share some URLs with you of the one i saw for a baic understanding of the software. (Let me know if you want me to share those URLs with you).

So actually google sketchup really helped me to get a better understanding of how in real am i gonna be working on my 3D Prototype. So i am done with the Sketchup Model but the Protoype is still in progess.

Will be uploading that too soon but for now lets have a look on my Sketchup model.

These are not the actual file. These are just the 2D img files from different angles. 

                                                                   FRONT VIEW

                                                                  SLIGHT RIGHT SIDE VIEW

EXTREME SIDE VIEW

                                                     

                                          But you can have a look of the 3D file in this Video.

Hope you would like it. Let me know if there can be some better ideas for the same.

That is all for today guys!

Toodles! 🙋

Understanding the Micro area in detail

Hi guys!
So here i am with my new post.

So, after exploring the micro area through visual sketches,

      (This is a sketch of the owner i.e the dyer named Mr. Sunil Kumar Verma)

 Understanding the requirements of the dyer,

 ...surfing through web pages for tentative ideas for the solutions,trying hard to generate forms artistically and also thinking practically based on the initial design brief,  a few explorations were done to come up with a final  idea of the prototype of the stall.
But before that lets first see the explorations.....

Soon i am gonna be working on my 3D prototype and uploading my process on the same.

(UHHHH .... All work and No Play makes me a Dull Girl.)

That's all for now guys!

Toodles! 🙋

Further Exploration of Problems and Solutions

Hi Guys!

As i did mentioned in my last to last post that i would soon be updating you all with the leftover exploration sheets of the problems faced by the Dyer and the required solution for the same so here are those...

Do have a look! 
😋😉
                      This page highlights the problem of no proper storage space for each dye with the idea of                                                                             respective solutions.

              This page highlights the problem of Sitting area for the owner and his comfort with the idea of                                                                               respective solutions.

        This page highlights the problem of High amount of Competition in the market with the idea of                                                                                  respective solutions.

   
              This page highlights the problem of Spacing for the customers with the idea of respective                                                                                               solutions.

       This page highlights the problem of no availability of a sink for the ease of the dyer to was cloth                                                                pieces with the idea of respective solutions.

And the last but not the least

This page highlights the problem of Water Storage with the idea of respective solutions.

That will be all for now guys.
Stay Connected for more Guys.
Toodles! 🙋

DESIGN BRIEF AND MOOD BOARD

Hi guys!
Here i am.... 😉

So today, i am gonna give you a brief idea about the DESIGN INTERVENTION i am gonna be working on... pretty soon! i.e A portable/ movable STALL for the Dyer.

DESIGN BRIEF

My idea on the Design intervention for the respective MICRO AREA chosen is to make a portable/ movable STALL kind of structure which would simply incorporate  all the basic requirements of the dyer after recognizing all his needs and wants.

The design intervention should have the facilities to fulfill his needs and wants and should consist all the materials required by the dyer for the ease of his work as for now though he has all the materials available but the space is not utilized in an efficient manner and there is no proper place and management of everythng which needs a lot of attention. 

Also the design would be able to attract attention of the customers, be it usual comers or new comers as the amount of competition for Mr. Sunil has increased over the years.

I will also try my best to use the materials which are cheap, affordable, easily available and which look good at the same time in making the stall.

As the stall is being made for a Dyer so it should also try to give a feel for the same with a name of the business (Board) at the top of the stall.

And finally comes the Mood board!

NO NO now do not get confused between the board i made earlier during my last module assignment which was Inspiration Board while this is Mood Board.

Basically it is a kind of a board which gives you a feel of whatever you are working on rather than giving you ideas and inspiring you which is the main idea behind Inspiration Board.

Here you go.....

That's all for now people.

Stay Connected!

Toodles! 🙋

Opportunity area identification

Hey guys! I am back!
So, i am almost towards the end of my module 4 as well as my Foundation course.

            (Can't really imagine how fast this year passed by.)

So, as i am now working on the design opportunity area of the micro i chose i.e
We were to look into the problems that our micro area subject is facing, find solutions for the same and create something that can at the end serve as a design intervention for that particular shop.

So, with all the brainstorming about the micro,

...and after discussing all the problems and solutions i came up with a thought of creating a stall for the business which will entirely serve as design intervention for my module 4 outcome.
Here we go...


                    This page shows the first problem faced by the Dyer, i.e Absence of a proper stall.

                   This page shows another problem faced by the Dyer, i.e Absence of sewage pipe.

                   This page shows another problem faced by the Dyer, i.e Space to dry wet clothes.

For now, i am working on my visual exploration sheets, i have only a few for now but very soon i will be uploading more.

So, Stay connected guys!

Toodles! 🙋